• Norboard announces their 2015 results

    Norbord Inc. (TSX: NBD) today reported Adjusted EBITDA of $57 million for the fourth quarter of 2015 versus $30 million in the prior quarter and $14 million in the fourth quarter of 2014. For the full-year 2015, Norbord recorded Adjusted …

  • 2016 will be an year of innovations for Microvellum

    President and Founder of Microvellum Mr. Dave Peel extends an encouraging year –end message to Microvellum customers and gave a message on look back of 2015 and their upcoming efforts of 2016. “As we close out 2015 and head into …

  • Mastercam connects with Worldskills

    WorldSkills International is happy to welcome Mastercam and its expertise in CNC machining software to the Global Partner group. Mastercam products are sold through their worldwide network of certified value-added Resellers. Their Resellers provide the highest level of service, including …

  • AFRC greets three new members to their association

    AFRC is proud and excited to welcome three new members to the Association: Timber Products Company, Mt. Hood Forest Products, and the Associated California Loggers. Timber Products Company was founded in 1918 and specializes in hardwood plywood and a range …

  • AWC released a guidebook on Wood Construction in High Wind Areas

    The American Wood Council (AWC) has developed a free series of easy-to-use Guides to Wood Construction in High Wind Areas based on provisions contained in AWC’s 2015 Wood Construction Manual (WFCM).   The guides can be found in AWC’s official …

  • Stiles Machinery to arrange a seminar on Manufacturing Solutions

    Stiles Machinery is going to host a seminar on Manufacturing Solution from February 24 to 25, 2016 at their High Point, North Carolina showroom. Registration to participate in this seminar is now open for all. During this seminar one will …

  • Lightweight Solutions from Henkel at ZOW 2016

    Henkel is going to introduce their new lightweight solutions at The ZOW. ZOW traditionally opens the exhibition year for the furniture industry and interior architecture. Once again, in 2016, this industry event is a welcome opportunity for Henkel to present …

  • Northern Apex introduces slim handheld mini RFID reader

    Northeast Indiana company Northern Apex is empowering the RFID industry by introducing a cost effective slim handheld mini RFID reader. Up to this point RFID readers, have been big clumsy devices. Northern Apex’s RG-500 reader is small enough to fit …

  • AWC’s statement on U.S Environmental Protection Agency (EPA)

    American Wood Council (AWC) President and CEO Robert Glowinski has issued the following statement about the U.S. Environmental Protection Agency’s (EPA) finalization of its Non-Hazardous Secondary Materials (NHSM) rule, which expands the list of materials recognized as “non-waste fuels” to …

  • U.S Softwood Lumber accomplishes over USD 10.5 million to India

    Total exports of U.S. softwood lumber to India reached USD 10.5 million in the first eleven months of 2015, according to a statement issued by American Softwoods (AMSO), the promotional partnership formed by three major U.S. softwood trade associations. The …

  • Norboard Inc. announces the termination of wood license

    Norbord Inc. (TSX: NBD) announced that the Quebec Minister of Forests, Wildlife and Parks has terminated the wood license associated with its curtailed Val-d’Or, Quebec OSB mill. Production at the Val-d’Or mill was indefinitely suspended in 2012 following persistently weak …

  • Cefla North America to enlighten on latest finishing technology

    Cefla North America is preparing to give its customers and prospects a four-month head start on learning about the industry’s latest-and-greatest finishing technologies. Instead of waiting for the IWF Show in Atlanta in August, manufacturers and other industry leaders can …

  • Dovetailed Drawer Boxes from Keystone Wood Specialists

    Keystone Cabinetry Components introduces Dovetailed Drawer Boxes that have been a mark of distinction for centuries, whether one need a kitchen full of custom dovetailed drawers with special features, or a single, cabinet drawer box for a single cabinet opening, …

  • Finishing Conference for Cabinet & Closet Expo 2016

    This year Cabinet & Closet Expo is going to arrange a full-day Finishing Conference. Finishing Expert Phil Stevenson will be the host of the conference. The day-long conference takes place March 22 as one of three tracks in the Cabinets …

  • Environmental Stewardship Program (ESP) adopts the EPA SmartWay Program

    The Kitchen Cabinet Manufacturers Association’s (KCMA) nationally recognized Environmental Stewardship Program (ESP) has adopted the EPA SmartWay Freight Transport Sustainability Program as an additional option for participants to receive credit.   In order to qualify to receive points, a cabinet …

  • Cefla North America associates with Henkel

    Cefla North America has announced that it has partnered with Henkel Corporation, developer of TECHNOMELT CHS UV Fusion Coating technology, to speed the process of giving melamine panels and other products highly desirable high-gloss as well as lower gloss finishes. …

  • An innovative approach from FPAC

    Forest Product Association of Canada (FPAC) always tries to invent new approaches towards sustainable forest management and generally takes legal initiatives to save it. Member companies of the Forest Products Association of Canada (FPAC) have agreed to follow an innovative …

  • ICC accepts the Formation of Tall Wood Ad Hoc Committee

    American Wood Council (AWC) Vice President Kenneth Bland, P.E., issued the following statement regarding the International Code Council (ICC) Board of Directors approval of the formation of a Tall Wood Ad Hoc Committee.   The committee will be made up …

  • Conestoga’s Weathered Grain can now be applied to Cabinetry Accessories

    Popular Weathered Grain option from Conestoga can now be applied to cabinetry accessories. Since adding the Weathered Grain option to their offering, it has become one of their most popular design options.   A weathering process ages the wood, creating …

  • Mastercam partners with Onshape

    CNC Software, Inc., the developer of Mastercam, has announced that it has partnered with Onshape, and their vision to bring CAD applications to users in an easy way. Seeking to modernize the way CAD users find and buy engineering apps, …


Follow Us
facebook-logo twitter-logo LinkedIn_logo  rss_logo 
 ttw_blogger_logo  ttw_blogger_logo  ttw_blogger_logo  ttw_blogger_logo

SUBSCRIBE NEWSLETTER:

ADVERTISEMENT

  • 02 venjakob 2018
  • 03 AWFS-2019
  • 05 WMF 2019
  • 06 Chem-Trend19
  • 30 WP-Europe