Monday, July 17, 2023
Contour edgebanding is now made easy with the latest innovations from SNX Technologies. The path breaking edgebanding solutions from SNX Technologies will be on display at their stand in AWFS Fair. People will be able to experience ways of bringing solutions to the complicated banding task with their latest innovations at a row.
SNX Technologies will run live contour edgebanding demos at the upcoming AWF Fair show in Las Vegas! SNX secured hundreds of curved parts to be edgebanded in the booth. The edgebanding performers will be:
News release the SNX nVision C1.5 contour (curved) edgebander. They will run live demos at the upcoming AWFS Show in Las Vegas.
All New – SNX nVision C1.5
The tightest radius in town…!!!
Edgeband and trim inside radii as small as 7/16″
Introducing the SNX nVision C1.5 series contour (curved) edgebanders. They designed the SNX nVision C1.5 for open-ended and tight inside radii parts.
What You Get
Machine with banding station, trimming station with one set of cutting tools, two articulated vacuum arms, edgeband coil stand, and one standard-size vacuum pod for banding station articulated arm.
Includes on-site installation and training, free phone support, operation manual, and one year limited warranty.
Also on display there will be the SNX nVision G1 & G2 Contour Bander Machines that are packed with new features that are helpful solutions for the woodworking industry. The quick-change glue pot system, enhanced PC controller and trimmer chip vortex extraction efficiency make these two machines highly efficient and productive.
SNX nVision G1-
The SNX nVision G1 is a semiautomatic contour (curved) edgebander. This machine has been designed for the tightest butt joints and radiuses. This can edgeband curved surfaces up to 5′ x 10′ weighing up to 230 lbs. One can also use this to easily band .5″ – 2.25″ thick boards with .5mm – 3mm tape. It is not only very easy to use and operate but it also has a simple setup system.
SNX nVision G2-
The SNX nVision G2 is a curved edgebander can handle shaped part banding throughput to the next level. It has dual arm contour bander with three-stations. It also displays an extended base frame that eases banding and trimming at the same time. A foot pedal activated mid-point transfer station accepts the finished banded part, raises it from the vacuum pod and then lowers the part onto the trimming pod arm at the press of a foot pedal.
Tags: AWFS Fair, Contour Edgebanding, SNX Technologies, wood, wood and panel, woodworking, woodworking and manufacturing, woodworking event, woodworking industry, woodworking USA
