• US: Woodworks appoints Interfor Senior Vp as 2021 chair

    Published on : Tuesday, December 22, 2020

    The United States’ WoodWorks Wood Products Council welcomes Bart Bender, Senior Vice President (VP), Sales and Marketing at Interfor, as the newly elected Chair to the programme for a two-year term beginning in 2021, and Keith O’Rear, Senior VP, Wood …

    Read More

  • Pantone reveals color of the year 2021- Ultimate Gray and Illuminating Yellow

    Published on : Thursday, December 17, 2020

    Another year is coming and Pantone just announced the color that is going to make the homes even brighter! “Pantone Ultimate Gray + Pantone Illuminating, two independent colors that highlight how different elements come together”. Pantone, the provider of professional …

    Read More

  • Jowat happy with USDA Biobased Certification for Biobased Product

    Published on : Tuesday, December 8, 2020

    Jowat has announced that its recently released GROW series of sustainable packaging adhesive has earned the USDA Certified Biobased Product label. The packaging adhesive, developed specifically for the North American market, is the first and only hot melt adhesive in …

    Read More

  • Roseburg welcomes two new members to Board of Directors

    Published on : Sunday, December 6, 2020

    Roseburg Forest Products is pleased to welcome Lynn Wilson, a former Vice President with Louisiana-Pacific Corporation, and Jim James, former CEO and Chairman of IDEAL Industries Inc., to the company’s Board of Directors. “Lynn and Jim bring decades of experience …

    Read More

  • Graco Appoints Brett C. Carter to the Board of Directors

    Published on : Saturday, December 5, 2020

    Graco Inc. (NYSE:GGG) announced today that Brett C. Carter has been appointed as a member of the Company’s Board of Directors, effective Feb. 11, 2021. Mr. Carter serves as Executive Vice President and Chief Customer and Innovation Officer of Xcel …

    Read More

  • Acadian Timber- happy with positive third quarter

    Published on : Tuesday, December 1, 2020

    Acadian Timber Corp recently presented the financial and operating reports the third quarter. “Operating conditions were favorable during the third quarter, but regional market demand was varied with increased demand for softwood sawlogs more than offset by a weaker than …

    Read More

  • Bessey debuts One-handed Table Clamps at IWF Connect

    Published on : Friday, November 13, 2020

    BESSEY’s newest clamp innovation, EZR table clamp, was designed primarily to work with track saw guides (slots/grooves, 12 x 6.5 mm to 12 x 8mm from Festool, Protool, Metabo, Makita, Hitachi/Hikoki and DeWalt), but this clamp does so much more. …

    Read More

  • DOMOTEX USA 2021 postponed

    Published on : Friday, November 6, 2020

    Hannover Fairs USA (HFUSA), the organizer of DOMOTEX USA, announced recently that after careful and thoughtful consideration, the trade show scheduled for March 1-3, 2021, will be postponed. The decision to postpone the 2021 edition of the show was based …

    Read More

  • Graco Launches Hydraulic Bolt Torquing Pump

    Published on : Wednesday, November 4, 2020

    Graco, one of the leading manufacturers of fluid handling equipment, is proud to introduce the new RenegadeTM Torque Series hydraulic pump. This pioneering hydraulic pack includes technology that delivers unmatched power, speed and reliability to complete jobs faster and raise …

    Read More

  • Stay safe and stay productive with Milwaukee innovations

    Published on : Wednesday, October 28, 2020

    Safety at work place is of top priority in the woodworking industry and to solve the issue Milwaukee has introduced heated jackets that are made in durable material and also provides wind and water resistance to survive the elements on …

    Read More

  • AWC Encouraged by NSR Final Rule

    Published on : Tuesday, October 27, 2020

    American Wood Council (AWC) President & CEO Jackson Morrill issued the following statement regarding the Environmental Protection Agency’s (EPA) final rule for New Source Review (NSR) project emission accounting. “This final rule will consider both emissions reductions and additions at …

    Read More

  • Mastercam introduces Educators Alliance

    Published on : Thursday, October 22, 2020

    Mastercam is pleased to announce the latest development in their commitment to the technical education community. The Mastercam Educators Alliance (MEA) is an organization designed to bring together the community of educators that teach and use Mastercam and provide a …

    Read More

  • New Milwaukee Mx Fuel perfectly climbs stairs ends transportation woes

    Published on : Thursday, October 15, 2020

    Milwaukee Tool is committed to providing the most portable and versatile drain cleaning solutions. The company is dedicated to continuing investments in technology to build solutions from the ground-up that provide these users with an easier way to get on …

    Read More

  • Michigan to fascinate with mass timber state building

    Published on : Tuesday, October 13, 2020

    Michigan’s Department of Natural Resources (DNR) plans to erect the new state building in mass timber. The Department of Natural Resources (DNR) has announced that they will utilize mass timber to build a $5 million customer service center and office.The …

    Read More

  • Milwaukee Tool Integrates One-Key with Autodesk BIM 360

    Published on : Saturday, September 5, 2020

    Milwaukee Tool is proud to announce that their One-Key digital platform now integrates with Autodesk Construction Cloud™’s BIM 360 construction management software, enabling customers to seamlessly share information between the two solutions and enhance asset tracking, project management, and reporting. …

    Read More

  • AWFS-Design it Digital Winners Announced in a Virtual Ceremony

    Published on : Saturday, August 29, 2020

    The Association of Woodworking & Furnishings Suppliers® (AWFS®)  recently announced the winners of its Design It Digital (DID) student CAD competition during a virtual awards ceremony on August 27, 2020. The winners of the 2020 Design It Digital Competition are: …

    Read More

  • Mastercam partners with SGS Precision Tools to provide tool libraries

    Published on : Wednesday, August 19, 2020

    Mastercam, one of the world’s leading CAD/CAM software, has announced a new partnership with KYOCERA SGS Precision Tools (KSPT) to provide tool libraries to the Mastercam user base. KSPT is an ISO 9001:2015-certified manufacturer of industry leading round solid carbide …

    Read More

  • A&E Millwork won the Best Luxury Cutting Boards award

    Published on : Wednesday, August 12, 2020

    A&E Millwork recently bagged the award in the category of the Best Luxury Cutting Boards in the World, according to the recent Global Luxury Consumers Report by Luxury Lifestyle Awards.The company A&E Millwork was founded in 2005, and soon became …

    Read More

  • Milwaukee expands personal lighting lineup with new Flashlights

    Published on : Tuesday, August 11, 2020

    Milwaukee Tool, adds to their Personal Lighting family of products once again with two new flashlight solutions. The expansion includes two new rechargeable lights equipped with high-definition light output – the USB Rechargeable 1100L Twist Focus Flashlight and the USB …

    Read More

  • Thermwood Honored 2020 Half Century Business Award

    Published on : Tuesday, July 28, 2020

    Thermwood the US based, multinational, diversified CNC machinery manufacturer was recently honored with Indiana Governor’s 2020 Half Century Business Award. Indiana Governor Eric J. Holcomb honored 76 Indiana companies and organizations with the 2020 Governor’s Century or Half Century Business …

    Read More


  • 05 WMF 2021
  • 30 WP-Europe
Follow Us
facebook-logo twitter-logo LinkedIn_logo  rss_logo 
 ttw_blogger_logo  ttw_blogger_logo  ttw_blogger_logo  ttw_blogger_logo