• Automatic Revere System from Biesse handles heavy lifting

    The automatic system from Biesse proves that it can handle the heavy lifting for RJM Cabinets. RJM appreciates the workability of Revere system recently. Take a glance. “The biggest advantage in using Viet’s Automatic Reverse System is reducing the need …

  • Treefrog launches new prefinished veneer laminates: Treefrog Open

    “Open to possibility. Open to design. Open to creativity.Introducing Treefrog Open, 8 new prefinished veneer laminates that are open to your next project” – Treefrog.   Eminently specifiable, breathtakingly beautiful, and wonderfully consistent, Treefrog Open includes trending neutrals in white …

  • Biesse accolades Scott Brandenburg with Selci Circle Award

    Biesse America is honored to announce Mr. Scott Brandenburg was presented with the prestigious Selci Circle Award at the company’s world HQs in Pesaro, Italy.   The new Selci Circle Award was developed by Biesse to recognize top performing area …

  • Canfor assigns new Board of Directors: Dianne Watts

    Canfor Corporation recently announced the appointment of Dianne Watts to its Board of Directors. “We are excited to have Dianne join our board and look forward to the experience, knowledge and fresh perspective that she will bring,” said Don Kayne, …

  • Roseburg reshuffles sales team for structural products

    Roseburg is pleased to announce that Phil Odom has been named Business Director for Structural Products. In his new role, Odom will have commercial responsibility for the Structural Products businesses, including plywood, lumber and engineered wood products. He joined Roseburg …

  • CNC Software releases Mastercam 2019 at IMTS

    Attendees at the International Manufacturing Technology Show (IMTS) 2018 will experience the most powerful machining software from CNC Software, Inc. to date, Mastercam 2019. IMTS is a premiere manufacturing conference held every even-numbered year in Chicago, attracting an international attendance …

  • Haefele to organize AIA Convention

    “They often say that fortune favors the bold. The innovators, the unique among us. And those know that design and specification excellence only comes from hardware and components which can keep up with and anticipate uses and needs while delivering …

  • Lockdowel introduces double headed pin

    Lockdowel announces its Double Headed Pin – a simple solution for fastening flat panels back to back, to a flat surface or ceiling surfaces. The Lockdowel Double Headed Pin inserts into housings on each surface. When attached the bond holds …

  • CPA announces their 2018 fall meeting

    Registration is now available for the 2018 CPA Fall Meeting/Material, Design & Technology Symposium.  The event, which takes place September 23 to 25 at the JW Marriott in Nashville, TN, will include two high caliber keynote addresses. During Monday’s luncheon, …

  • Mastercam sets landmark in CAM industry

    CNC Software, Inc. announces the company’s flagship software, Mastercam, is the first CAD/CAM software to reach 250,000 installations worldwide. The 250,000th seat was purchased by Roding Automobile GmbH, a division of Stangl & Co. GmbH Prӓzisionstechnik, a precisions manufacturing company …

  • EPA implements a new regulation on composite wood products

    Starting from June 1, 2018, all imported and domestically-produced composite wood panels and products made with these panels must now be third-party certified as compliant with mandatory national formaldehyde emissions requirements under the Environmental Protection Agency’s (EPA) TSCA Title VI.  …

  • Lockdowel brings new Mini Barbed Channel Lock

    Lockdowel announces the company’s new Mini Barbed Channel Lock, a simple solution to fastening thinner boards. This small fastener yields an amazingly strong bond for half inch and thinner boards, resisting at least 70 pounds of pull force. Ideal for …

  • Stiles to exhibit complete range of solid wood solutions at IWF 2018

    Stiles Machinery is looking forward to showcasing their wide-range of world-class solutions for solid wood manufacturers at this year’s International Woodworking Fair (IWF) in Atlanta, Georgia, August 22-25, 2018. Stiles will reveal HOMAG’s entirely new lineup of machinery to the …

  • Axalta invests more in Industrial Wood Manufacturing

    Axalta has increased its manufacturing capability for its global industrial business by investing in the 56,000 square foot Northern Stacks complex in Fridley, Minnesota. Axalta will use the facility for research and development, focused application work for its Industrial Wood …

  • Founder of KCD Software: John Murphy will be at IWF Atlanta

    KCD Software is pleased to announce that John Murphy, company founder, will present at the CNC Symposium, a comprehensive day-long program running in conjunction with the 2018 International Woodworking Fair at the Georgia World Congress Center in Atlanta.   To …


Follow Us
facebook-logo twitter-logo LinkedIn_logo  rss_logo 
 ttw_blogger_logo  ttw_blogger_logo  ttw_blogger_logo  ttw_blogger_logo

SUBSCRIBE NEWSLETTER:

ADVERTISEMENT

  • 02 venjakob 2018
  • 03 AWFS-2019
  • 05 WMF 2019
  • 06 Chem-Trend19
  • 30 WP-Europe